AFMAT Content updated 12 December 2018 Administrator General, Material data, New Features (0) We have added more raw and fitted crack growth rate data to the AFMAT database. The raw [More]
Through Cracked Holes - Bi-Axial Loading Conditions 10 August 2016 Administrator Bi-Axial loading, New Features (0) One of the items of interest at our recent European Workshop was the solution for through cracks at holes under bi-axial loading. We have recently done some modeling work to look at this case, and have some results for a few basic cases. Plate Width: 4 inches Plate Height: 4 inches Diamet... [More]
2014 European AFGROW Workshop Summary 13 July 2014 Administrator General, Life Prediction, New Features, User Workshop (0) Predict, Preferences Issues/Suggestions Output intervals printed in "hours" if the option to display life in hours is selected in the Output Intervals tab Also, the crack length plots should be converted to hours In the Propagation Limit tab, the option to stop at a cycle limit should be automa... [More]
Changing Your Log-In Password 18 April 2012 Administrator AFGROW Tips and Tricks, General (0) In case you've forgotten/misplaced your login password and don't like the new one that's been assigned, here are the directions to change your password: 1. Login with the generated password;2. After you login in, navigate to following page... [More]
2012 Aircraft Airworthiness & Sustainment Conference 11 April 2012 Administrator General, New Features (0) 2012 Aircraft Airworthiness & Sustainment Conference [More]
Rules of Thumb 30 September 2010 Administrator General, Rules of Thumb (0) Several Users have asked me to post some helpful "rules of thumb" that may be useful when performing life prediction tasks. While I am happy to do it, I must first state that while I have found this information to be useful, each user must take full responsibility for their own life predictions. Nei... [More]